Printer User Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING SOFTWARE AND GRAPHICS
- Using the LQ-2550 With Application Programs
- Computer-Printer Communication
- Enhancing Your Printing
- Graphics
- User-Defined Characters
- Designing Your Characters
- Design Grids
- Data Numbers
- Sending Information to Your Printer
- Printing User-Defined Characters
- Copying ROM Characters to RAM
- Letter Quality Characters
- Proportional Mode Characters
- Superscripts and Subscripts
- The Graphics Command
- Column Reservation Numbers
- A simple Graphics Program
- Using Hand-Calculated Data to Print Graphics
- Using Software and Graphics
- Mixing Print Styles
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- Troubleshooting
- Problems and Solutions
- The Printer Does Not Print
- The Printer Stops Printing
- The Printout is Spaced Incorrectly
- The Printout is Faint or Uneven
- The Printout is Not what You Expect
- Single Sheets Do Not Feed Properly
- Continuous Paper Does Not Feed Properly
- Cut Sheet Feeder Does Not Load Paper Correctly
- The Short Tear-Off Feature Does Not Work Properly
- Color Printing Is Not What You Expect
- Data Dump Mode
- CHAP 7-USING PRINTER OPTIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX A-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
Caution:
This mode
erases
any custom-designed macros and default
settings
that
you have set and replaces them with the original settings.
To
use the CLEAR
flLL
PlflCROS
mode, follow the steps below.
1.
Select
the
CLEflR
flLL
MCROS
mode from the SelecType main menu.
The display changes to:
:CLEFIRFILLMf3CROS
b
2.
Activate this mode by pressing the
b
button.
The display changes to:
4FlBORT
CLEfiR.
Press the
b
button to clear all macros and return them to their
preset values.
If you do not wish to clear all macros, press the
4
button.
If you chose to clear all macros, the display briefly shows:
FILLtlfKROSCLEARED
It briefly changes to:
CLEhRDEFfVJLTS
Then,
the
display changes to:
4
FtBORT
CLEi?R,
3.
Press the
b
button to clear the default settings. (If you do not wish
to clear the default settings, press the
4
button.)
If you clear the defaults, the display briefly shows:
DEFAULTSCLEfiRED
It briefly changes to:
PLEASETIJRNCFF
This reminds you to turn your printer off and back on again to let
your changes take effect.
Then, it changes to:
:CLEFIRFlLLMfXRUS
b
You
are
now
back at the SelecType main menu.
Using the Printer
3-25