Printer User Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING SOFTWARE AND GRAPHICS
- Using the LQ-2550 With Application Programs
- Computer-Printer Communication
- Enhancing Your Printing
- Graphics
- User-Defined Characters
- Designing Your Characters
- Design Grids
- Data Numbers
- Sending Information to Your Printer
- Printing User-Defined Characters
- Copying ROM Characters to RAM
- Letter Quality Characters
- Proportional Mode Characters
- Superscripts and Subscripts
- The Graphics Command
- Column Reservation Numbers
- A simple Graphics Program
- Using Hand-Calculated Data to Print Graphics
- Using Software and Graphics
- Mixing Print Styles
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- Troubleshooting
- Problems and Solutions
- The Printer Does Not Print
- The Printer Stops Printing
- The Printout is Spaced Incorrectly
- The Printout is Faint or Uneven
- The Printout is Not what You Expect
- Single Sheets Do Not Feed Properly
- Continuous Paper Does Not Feed Properly
- Cut Sheet Feeder Does Not Load Paper Correctly
- The Short Tear-Off Feature Does Not Work Properly
- Color Printing Is Not What You Expect
- Data Dump Mode
- CHAP 7-USING PRINTER OPTIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX A-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
Next, the display changes to:
:LOFIDMFlCRU
b
2. Press the V button.
The display changes to:
SCHANGEMACRU
b
3. Press the
b
button.
The display changes to:
:FONT
Roman,
4.
Press the
A
or
V
button to locate the
FORM LENGTH
option.
The display shows:
SFORbl
LNG
Tractor,
5. Press the
b
button.
The display changes to:
STractor
66LINEb
6.
To change form length for tractor feed, press the
b
button.
(To change form length for
the
cut
sheet
feeder, first press the
V
button. To set CSF bin 2, press the
V
button
once
more. Then press
the
b
button.)
If you are changing form length for
the
tractor feed, the display
changes to:
4Tractor
66LINE:
(If you are changing form length for a cut sheet feeder, the bin
number and form length are displayed.)
7.
Press the
A
or
V
button to set the desired number of lines. In this
example, the page length is set to 72 lines for the tractor feed.
The display shows:
4Tractor
72LINES
8. Press the
4
button.
The display
shows:
:Tractor
72LINEb
Using the Printer
3-27