Printer User Manual

If you adjust your loading position to the proper point, you can get half
of the margin at the bottom of one page and half at the top of the next
page as shown in the following illustration.
I” SUP Off {Skip over perforation OFF)
I
23456789 :
;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\I
3456789:;<=~?@ABCDEFGHIJKLMNOPQRSTUVWXYZ~\~~
l
456789:
;<=>?@ABCDEFGHIJKLMNOPQRSTUVwXYZ[\l~m
56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\~'--'
,________ - ----_- -----------------------
6789:
;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\I^ 'a
l
789:
;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\II-at
89:
;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\j'_'abC
9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]*-'abed
l
:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\l^_'abcde
IN SKIP On (Skip over perforation ON)
. 23456789: ;<=>?@'ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]'
3456789 : ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]--
l
.---------------------
__-_-_------
l
456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]--'
l 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]* 't
6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\IA-'at
To set skip over perforation to provide a one-inch margin using
SelecType, set the 1” SKIP option by following the steps in the
CHANGE MACRO section earlier in this chapter.
Note: Most application programs take care of top and bottom
margins. Therefore, do not turn on skip over perforation unless your
program does not provide these margins.
Using the Printer
3-29