User Guide

Connecting the Projector to Your Equipment
29
Connecting the Projector to Your Equipment
The illustrations in this section show the PowerLite Pro Z8000WUNL. If
you are using the PowerLite Pro Z8050WNL, the projector and interfaces
are slightly different.
Connecting to a Computer
Connecting to the VGA Port
Procedure
A Connect one end of the VGA computer cable to the
projector’s Computer port, and the other end to your
computer’s monitor port.
B Turn the projector on (s p.34), select the image source
(s p.43), and adjust the image (s p.35).
Make sure the Input Signal setting in the Signal menu is set to Auto or
RGB. s p.69
Connecting to the BNC Ports
Procedure
A Attach the BNC connectors on one end of your cable (not
included) to the projector’s BNC ports. Connect the other
end of the cable to your computer.
B Turn the projector on (s p.34), select the image source
(s p.43), and adjust the image (s p.35).
Make sure the Input Signal setting in the Signal menu is set to Auto or
RGB. s p.69