User Guide

Correcting Distortion in the Projected Image

C Use the [h] button on the remote control or the [w/],

[v/ ], [</ ], and [>/ ] buttons on the control panel to

select the corner you want to adjust, and then press the

[Enter] button.

D To adjust the shape, use the [h] button on the remote

control or the [w/ ], [v/ ], [</ ], and [>/ ] buttons on

the control panel. When you finish adjusting the corner,

press [Esc] or [Enter].

If the triangle in the direction you are adjusting the shape turns

gray, as shown in the screen shot below, you cannot adjust the

shape any further in that direction.