Certificate

ManualsBrandsEPT ManualsPCB ConnectorsEdge connector (recacle) DIN 41612 Type B/2 32F ab 4 mm straight Total number of pins 32 No. of rows 2 1 pc(s)

Connectors for Use in Data, Signal, Control and Power Applications - Component

C/2, C/3 flat rock con

nectors, Model(s) Series D, Series E, Series F

Connectors, Model(s) "Flat Cable connector", C, C/2, and C/3, 512 22170-453, 512 23170-453, ATCA backplane, ATCA front board, Series B, Series C,

Series PC 104+, Series Socket strips

Series Velox, Cat. No. 308, followed by -5, followed by 0, 1, 2 or 3, followed by 1 or 2, may be followed by two digits, may be followed by -4, may be

followed by 0, 1 or 2

Series. 401 (plug) and 402 (receptacle), followed by 5, followed by 0, 1, 2, 3, 4 or 5, followed by 1, 2, 3, 4, or 6 may be followed by two digits,

followed by -, followed by 5, followed by 0,1,2,or 3

μTCA AMC module 502-12170-153, μTCA AMC module 502-14170-153, μTCA Power Module Output Connector Backplane

μTCA Power Module Output Connector Daughter Card

Connectors and headers, Model(s) VarPol

Flat cable connectors, Model(s) Series G, Series H, Series M, Series R, Series VME64

Flat rock connectors, Model(s) Serie C

PGA-Socket connectors, Model(s) Series Hardmetric hm 2.0 Connectors

Series DIN signals, Model(s) 119-4xxxx, 119-9xxxx, 120-4xxxx, 120-9xxxx, 123-4xxxx-00

Type D female connectors, Model(s) 106-, followed by a three digit number, followed by a two digit number.

Type E female connectors, Model(s) 108-, followed by a three digit number, followed by a two digit number.

Type G male connectors, Model(s) 111-, followed by a three digit number, followed by 64.

VarPol connector angled pin headers, Model(s) 981 or 98,2 followed by -nn, followed by a three digit number, followed by b1, for press-fit

technology.

VarPol connector straight pin headers, Model(s) 971 or 972, followed by -nn, followed by a three digit number, followed by b1, for press-fit

technology.

Marking: Company name, model designation and the Recognized Component Mark, on the device or carton.

When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment database

for

additional information regarding this product's certification.

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under

UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service.

Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information,

Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without

any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear

ECBT2.E130314

Connectors for Use in Data, Signal, Control and Power Applications - Component

Page Bottom

See General Information for Connectors for Use in Data, Signal, Control and Power Applications - Component

EPT GMBH E130314

BERGWERKSTR. 50

86971 PEITING, GERMANY

Last Updated on 2013-09-05

e 1 of 1ECBT2.E130314 - Connectors for Use in Data, Si

nal, Control and Power Applicatio

...

23.09.2013http://database.ul.com/c

in/XYV/template/LISEXT/1FRAME/showpa

e.html?nam

...