User Manual

ManualsBrandsEPV Projection Screens ManualsAcoustically Transparent SeriesSpecial Edition 110" Projector Screen (Matte White)

Acoustically Transparent

Peregrine A4k

Important Safety and Warning Precautions

Please follow these instructions

carefully to ensure proper maintenance and safe

Acoustically Transparent Fixed

Frame Screen

1. When ha

nging the screen up, please

furniture, ladders, windows, etc., occupy the s

2. Regardless if the screen is hung on or installed into the wall;

are used and that the we

ight is supported appropriately by a strong and structurally sound surface

large and heavy picture fram

e should.

(Please consult a home improveme

nt speci

3. Frame parts are m

ade of high quality velo

4. When not in use, cov

er the screen with a fur

impurities.

5. W

hen cleaning, use a soft cloth moistened with w

surface.

6. Never attem

pt to use any solutions, che

7. In order to avoid da

maging the screen, avoid touching it directly with your fingers,

other sharp or abrasive objects.

8. Spare parts should be placed out o

f reach of small childre

CAUTION:

The projection screen frame is ma

de of high

Use a soft cloth with warm w

ater to

To avoid damaging the scr

een material, never attem

cleaners on the scr

een itself, and never attem

objects.

Acoustically Transparent

Fixed Frame Projection Screen

& Special Edition A4K

User’s Guide

Important Safety and Warning Precautions

carefully to ensure proper maintenance and safe

Frame Screen

nging the screen up, please

make sure that no other objects –

such as power switches, outlets,

furniture, ladders, windows, etc., occupy the s

pace designated for your Fixed-Fram

e screen.

2. Regardless if the screen is hung on or installed into the wall;

make sure that t

he proper

ight is supported appropriately by a strong and structurally sound surface

e should.

nt speci

alist for the best advice on installation.)

ade of high quality velo

ur-surfaced alum

inum and should be handled with care.

er the screen with a fur

niture sheet to protect it f

rom dirt, gri

hen cleaning, use a soft cloth moistened with w

arm water to remove any m

arks on the fra

pt to use any solutions, che

micals, or abrasive cleaners on the screen s

maging the screen, avoid touching it directly with your fingers,

f reach of small childre

n in accordance with h

ousehold sa

de of high

-quality alum

inum alloy and should be handled

ater to

remove any spots on the scr

een material surface.

een material, never attem

t to use any solutions, chemicals, or abrasive

een itself, and never attem

pt to touch the screen wi

th your fingers or sharps/abrasive

Fixed Frame Projection Screen

& Special Edition A4K

Series

carefully to ensure proper maintenance and safe

ty with your

such as power switches, outlets,

e screen.

he proper

mounting anchors

ight is supported appropriately by a strong and structurally sound surface

just as any

inum and should be handled with care.

rom dirt, gri

me, paint, or any other

arks on the fra

me or screen

rface.

maging the screen, avoid touching it directly with your fingers,

writing tools, or any

ousehold sa

fety guidelines.

inum alloy and should be handled

with care.

een material surface.

t to use any solutions, chemicals, or abrasive

th your fingers or sharps/abrasive

Summary of content (9 pages)

PAGE 1
Acoustically Transparent Fixed Frame Projection Screen Peregrine A4k & Special Edition A4K Series User’s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety safe with your Acoustically Transparent Fixed Frame Screen 1. When hanging nging the screen up, please make sure that no other objects – such as power switches, outlets, furniture, ladders, windows, etc., occupy the sspace designated for your Fixed-Framee screen. 2.
PAGE 2
PARTS LIST 1. Frame Parts x 6 pcs (4 top/bottom frame pcs. + 2 side frame pcs) 9. M5x15Screws x 16 pcs 2. Tension Rods x 6 pcs 10. User Guide x 1 pc (4 top/bottom rods + 2 side rods) 3. Screen Material x 1 pc 4. Center joints x 2 pcs 5. Elbow Joints x 4pcs 6. Wall brackets x 2-4pcs 7. Wood Screws x 8pcs 11. Center Support Bar x 1 – 2 pcs (depending on model/size) 12. Support joiner x 2 – 4 pcs (depending on model/size) 13. Fix Plates x 50 – 90 pcs (depending on model/size) 14.
PAGE 3
. Insert both elbow joint connectors into the long horizontal frame (fig.1). Long frame Push Push Joint M5×15 Screws ( fig.1) Push Push Short frame Short frame 4. Join all four frame parts together following the steps showed below. After making sure that all four corners join at right angles to form a perfect rectangle, fasten the four angles together by using the (x8) joint screws included (fig.2).
PAGE 4
Push ( fig.2) 5. After making sure that all four corners join at right angles to form a perfect rectangle, fasten the four angles together by using the (x8) joint screws included (fig.3). Screw ( fig.3) ATTACHING THE SCREEN MATERIAL TO THE FRAME_ 1. Unroll the screen material and lay it down on a clean surface. Then insert the tension rods separately into the edges of all four corners of the material (see fig.4).
PAGE 5
3. Carefully unroll the material inside the frame. (Fig.5) Please note the material will be noticeably smaller than the frame, as the material must be stretched to create a sufficient amount of tension for perfect material flatness. Notes：    Make note of the label to help distinguish the back and front side. Unroll the screen material face down Keep the screen material as close as possible to the frame and do not allow it to scratch against any part of the frame. ATTACHING THE FIX PLATES_ 1.
PAGE 6
Tip for attaching the last corner(D): 1. Position yourself left of location ①. 2. Pull the material to the corner of the frame with your hand while your left Pull hand snaps in the fix plate on location ① 3. Then insert and snap in the fix plate on location②. ③ ④ 4. Next, move and position yourself on location ③，then pull the edge to the frame and fasten plates on locations③and④. 5. Finally, fasten the last fix plate on location⑤. (Fig.10) ① (Fig. 10) ② ⑤ 4.
PAGE 7
6. Fasten the remainder of the fix plates in the empty locations in the red markings to complete attaching the screen material. (Fig.13) (Fig.13) BLACK BACKING ATTACHMENT The purpose of the black backing material is to block out any light penetration that may reflect off of anything mounted behind the screen, which can cause distortion to the projected image. The black backing is held in place by the Velcro that is on the fix plates.
PAGE 8
2. Insert the Center Support Bar into the upper top groove on the back of the frame (not where the fix plate inserts) with the bottom end near the approximate center point of the frame and place it in at an angle so that both ends of the bar are in alignment with the groove(Fig. 18 and 19). Diagonal models 150” and below use 1 x Center Support Bar Remove Center Support Bar push (Fig.
PAGE 9
INSTALLATION INSTRUCTIONS 1. Locate your desired installation location with a stud finder (recommended) and mark the drill-hole area of where the screen is to be installed installed. 2. Drill a hole with the proper bit size according to the wood screw screws included. 3. Line up the wall brackets with the drilled holes on the installation location and screw them in using a Philips screwdriver.