Installation guide

Quadro Manual I: Installation Guide Step 5: Configuring a Conference on the QuadroCS
Step 5: Configuring a Conference on the
QuadroCS
1. Open the Conferences page from the Conference Management menu
Fig. I-19: Conferences page
2. Click Add to open the Conference Wizard to guide you through the basic settings
needed to generate a new conference. The Conference Wizard consists of two pages
– one for configuring general Conference General Settings and one for Conference
SIP Registration settings.
Fig. I-20: Conference General Settings page
3. Enter a unique Conference ID for the conference. If the conference is registered at a
SIP server, this ID must be the SIP Registration Number.
QuadroCS (SW Version 3.0.x) 21