Installation guide

Quadro Manual I: Installation Guide Step 5: Configuring a Conference on the QuadroCS
SIP Outbound Proxy Settings are used to configure the QuadroCS’s connection to
the SIP server. The SIP Outbound proxy is a SIP server where all the SIP requests and
other SIP messages are transferred. Some SIP servers use outbound proxy servers to
escape restrictions of NAT. SIP Outbound Settings are provided by the SIP server
provider and are used by the QuadroCS to reach the selected SIP server. If an Out-
bound proxy is specified for a conference, all outbound SIP calls from that conference
are sent to that outbound proxy.
SIP Outbound Proxy address requires the IP address or the host name of the
outbound proxy.
SIP Outbound Proxy Port requires the port number on which QuadroCS may
reach the outbound proxy.
SIP UserID text field requires an identification parameter to reach the SIP server.
The UserID may be requested by some SIP servers. It should be left empty if the
SIP server does not require it.
Duplicate allows duplicating a conference with the settings of an exiting one: The Con-
ference Wizard is opened again, with some basic settings of the selected conference
already filled in. Basic settings for the new conference (like password, username, etc.)
will be required, in any case.
Finish will complete the configuration of the conference and the conference will be dis-
played in the All Conferences table:
Fig. I-22: All Conferences table
QuadroCS (SW Version 3.0.x) 23