Installation guide

Quadro Manual I: Installation Guide Appendix: Changing the Administrator's Password
Appendix: Changing the Administrator's Pass-
word
For security reasons, it is recommended that you change the default administrator's pass-
word. The username of the administrator, admin cannot be changed.
Under the System menu, select Change Password.
The Change Password page will be displayed.
Fig. I-23: Change Password page
Enter the Old Password (19) followed by the New Password and Confirm New Pass-
word. Please note that only alphanumeric characters may be entered here.
Save the password in a secure place. If the password is lost, a factory reset will need to be
carried out on the unit (see Administrator's Manual, Hardware Overview). All settings are
lost after a factory reset. After a factory reset the default password (19) will be restored.
QuadroCS (SW Version 3.0.x) 26