Operation Manual

• Use a pen to mark the positions of 2 bore holes A (dia-

gonally opposite) in the mounting plate on the wall. The

bore holes B can be used for installation with a ush-

mounting box.

• If you are working with a stone wall, drill the marked two

5 mm holes and insert the plugs supplied. If you are wor-

king with a wooden wall, you can pre-drill 1.5 mm holes

to make screws easier to insert.

• Use the screws and plugs supplied to fasten the moun-

ting plate to the wall.

• Attach the wall thermostat with the frame on the moun-

ting plate. Make sure that the arrows

on the back side of the wall thermo-

stat point upwards and that the clips

on the mounting plate latch into the

openings on the wall thermostat.