Operation Manual

40
10. Teaching-in of MAX! components
In order to use the MAX! Wall Thermostat
+
in your installa-
tion, you must teach it in to the MAX! system. You can use
the MAX! Wall Thermostat
+
both in conjunction with the
MAX! Cube or without using the MAX! Cube. The two pos-
sible usage cases are described in the following sections.
10.1 Teaching in at the MAX! System with the
MAX! Cube
The MAX! Wall Thermostat
+
is taught in and congured
in combination with the MAX! Cube via the local MAX!
Software. The functions described in chapter 17 are then
available via the local MAX! Software. The conguration
menu of the MAX! Wall Thermostat
+
(„Menu/Mode“) but-
ton is deactivated in this case.
In order to teach in at the MAX! Cube, proceed as follows:
• Start the local MAX! Software and click on „New device“.
• Perform a long press of the „OK“ key on the MAX! Wall
Thermostat
+
.
• The antenna symbol appears in the display and the MAX!
Wall Thermostat
+
appears in the MAX! Software.
• In to software, go to „Next“ to give the device a name
and assign it to a room.
• The MAX! Wall Thermostat
+
is now integrated in the
system and can be congured in the software of the re-
spective room.
As soon as the MAX! Wall Thermostat
+
has been
taught in on a gateway like the MAX! Cube, all data
such as date, time or week programme are transmit-
ted to it via the radio connection.