Operation Manual
42
11. Teaching-out of wireless components (UnL)
During operation with the MAX! Cube, the MAX! Wall Ther-
mostat end the other devices are taught out via the local
MAX! Software in the respective room.
During operation without the MA X! Cube you use the „UnL“
function in the menu in order to unteach devices that have
been taught in at the MAX! Wall Thermostat
+
(e.g. MAX!
Radiator Thermostat). All radio components are untaught
simultaneously.
To unteach, proceed as follows:
• Select the “UnL” menu item with the (+) and (-) buttons.
• Conrm the setting with the OK button.
• “ACC” will show on the display.
• Conrm with the OK button.
After the „UnL“ function all connection partners are dele-
ted from the MAX! Wall Whermostat
+
; factory setting is
not mandatory.
12. Display content during normal operation
During normal operation, the operating mode, weekday,
nominal temperature, time, radio synchronicity and swit-
ching periods are displayed.
The bars for switching periods of the week programme are
displayed for each time interval for which the nominal tem-
perature is above the reduced temperature. An example
can be found in sec. 17.1.1.