Operation Manual
48
In the display, bars for heating phases are displayed
whenever the set temperature for the period is high-
er than the set reduction temperature.
If you want a room (e.g. the bathroom) to also be heated
during lunchtime the programming could look as follows:
Monday - Sunday:
from 00:00 to 06:00 15.0°C
from 06:00 to 09:00 23.0°C
from 09:00 to 12:00 17.0°C
from 12:00 to 14:00 19.0°C
from 14:00 to 18:00 17.0°C
from 18:00 to 22:00 21.0°C
from 22:00 to 23:59 15.0°C
17.2 Switching time/day (t-d) display
The factory setting will show the time on the display. In the
menu the display can be switched to the date.
• Open the conguration menu by pressing the menu but-
ton for more than 3 seconds.
• Sel ect the “ t- d ” menu item wit h the (+) and (-) buttons and
conrm with the OK button.
• Now set the format you want to show on the display
(date and time will switch on the display) with the (+)
and (-) buttons.
• Conrm setting with the OK button.
•
•
17.3 Switching nominal/actual temperature (S-A)
In the factory settings, the display will show the nominal
temperature. In the conguration menu, you can change