Operation Manual
49
the display setting from nominal to acutal temperature.
• O p e n t h e c o n g u r a t i o n m e n u b y p r e s s i n g t h e m e n u b u t t o n .
• Select the (S-A) menu item with the (+) and (-) buttons
and conrm with the OK button.
• N o w se t t h e f o r mat y o u w a n t t o sh ow o n t h e d i s p la y ( „ SEt“
fo r the n o mi n al t emp e rat ur e an d „ ACt“ fo r th e ac t ual t em-
perature) with the (+) and (-) buttons.
• Conrm setting with the OK button.
If the actual temperature is selected,
the display will disbplay „SEt“ for 5
seconds on change of the nominal
temperature (or on change of mode).
Afterwards, the display automatically
changes back to actual temperature.
17.4 Comfort and reduced temperature ( )
The comfort ( ) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
When using MAX! without Cube, the comfort and redu-
ced temperature can be changed via corresponding but-
tons as follows:
• Press the comfort ( ) / reduced ( ) temperature button
for a few seconds.
• The display shows the respective symbol and the corre-
sponding comfort or reduced temperature.
• Change the temperature with the (+) and (-) buttons.
• Conrm setting with the OK button.