Technical data

41
• Use the screws and plugs supplied to fasten the moun-
ting plate to the wall.
• Attach the wall thermostat with the frame on the moun-
ting plate. Make sure that the arrows on the back side of
the wall thermostat point upwards and that the clips on
the mounting plate latch into the openings on the wall
thermostat.
9. Installation in multiple combinations
You can mount the MAX! Wall Thermostat
+
with the at-
tachment frame provided or use it with frames of other
manufacturers as well as integrate the electronic unit into
a multi-gang frame. In both cases, mounting with adhesi-
ve strips and screws is possible. For mounting with multi-
ple combinations, make sure that the mounting plate of the
MAX! wall thermostat is seamlessly aligned to the already
xed mounting plate/retaining ring.
The MAX! Wall Thermostat
+
is designed to t into frames
supplied by the following manufacturers: