Operation Manual
3232
5. Setting the date and time
If batteries are inserted or replaced, the date and time is
automatically requested after a brief display of the rmwa-
re version number.
• Set the year, month, day, hour and minute (F) with the
selector dial (D) and conrm with OK (I).
F
D
I
The motor moves the control pin backwards during the set-
ting of the date and time.
• The display of „INS“ with the rotating „
∏
“ shows that the
motor is still travelling back. When only „INS“ is shown
in the display, the actuator can be installed on the valve.
• The weekly program and other settings can be ad-
justed before installation. Press the Menu key for this,
while „INS“ is shown in the display. You can nd more
details under „10. Conguration menu“.
• After the programming has been completed, „INS“ is
shown again in the display and installation can take place.