User Manual

18
9. Configuration and Operation
When the batteries have been inserted into the sensors and the batteries have been inserted
subsequently into the base station (this order is to be strictly followed), the data transmitted via
radio by the sensors should appear in the LC display of the base station.
a) Basic Settings, Configuration
The following settings are still required for operation:
• year, month, day, hour, minute
• latitude and longitude degrees of your location
• time zone
Only after these settings, the phase of the moon, MIN-/MAX-data and the sunrise/
sunset times as well as the date and time will be indicated.
Additional setting options:
• assignment of the march indication (air pressure, indoor or outdoor temperature; standard:
air pressure)
• unit of the temperature measurement (standard: °C)
• unit of the wind speed measurement (standard: km/h)
In the configuration mode the keys have the following functions:
Imprint Function Description
IN (not used, no function)
SENSOR - Decrease value
MIN/MAX EXIT Exit the configuration mode
RESET + Increase value
OUT NEXT Go to next setting
This key layout is also given on the back side of the weather station.
F