User Manual

Please note:

If you press the + or - key during the individual settings a little bit longer, the values

will be changed rapidly.

After each setting procedure you can exit the conﬁguration mode by pressing the

EXIT key or you can go the the next setting by activating the NEXT key.

The conﬁguration is performed according to the following order:

year Æ month Æ day Æ minutes Æ hours Æ latitude degree (LA = latitude) Æ

Längengrad (LO = “Longitude”) Æ Zeitzone (ti) Æ assignment of the march indication Æ

temperature unit Æ wind unit

Afterwards, the setting order restarts from the beginning.

>2 seconds

hours

minutes

day

month

year

Calling-up the conﬁguration mode

Press the IN key for approx. 2 seconds till the display

changes.

The configuration mode can be closed at any time by

pressing the EXIT key (= MIN/MAX). See ”Exiting the

Conﬁguration Mode”.

Setting the date and time

Set the current year via the + and - keys.

Press the NEXT key.

Set the month via the + and - keys.

Press the NEXT key.

Set the day via the + and - keys.

Press the NEXT key.

Set the minutes via the + and - keys.

Press the NEXT key.

Set the hours via the + and - keys.

Press the NEXT key, afterwards you can set the latitude

degree (in the display appears LA = latitude). See next page.