User Manual

21
Setting the time zone
The entry of the time zone is required for the calculation of
sunrise and sunset times.
Enter the difference to the GMT (Greenwich Mean Time) =
UTC (Universal Time).
In the appendix is a table showing the time zone difference
from UTC for North America time zones.
Set the current value for your time zone via the + and - keys.
To ensure the correct functioning of the weather station, all
settings required have been performed at this point. The
extended settings are not necessary for normal operation.
Press the EXIT key to close the configuration mode and turn
back to the normal mode. Afterwards, the base station is in
normal operating mode.
Press the NEXT key to set further values if required. See
below.
NEXT
assigning
the
march
direction
+
-
+
-
NEXT
close the
configuration
mode
EXIT
time
zone
extended
configurations
or
Assigning the march indication
The following representations can be assigned to the course
indication:
• air pressure
• indoor temperature
• outdoor temperature
If the march indication is assigned to one of the two tem-
perature indications, the symbol “ ” appears additionally
in the corresponding display field.
Fading-in/Identification in the display field:
P = air pressure
O = outdoor temperature
I = indoor temperature
Select the assignment desired via the + and - keys.
Press the NEXT key. Now, the unit of the temperature
indication can be selected.