User Manual

60
Key Functions
Short key pressure:
Switching between the indoor temperature indication and the dew point temperature
Long key pressure (min. 2 seconds, till the display changes):
Call-up of the configuration mode (see back of the housing for key layout)
If applicable, selection of additional outdoor sensors (display of SENSOR and
sensor number (1….8))
(if only the multipurpose sensor is used, the display will not change)
In the IN/MAX mode: indication of the point of time at which the MIN/MAX value
has been measured
Call-up of the MIN/MAX values:
press once: MIN values (MIN appears in the display)
press twice: MAX values (MAX appears in the display)
press three times: back to normal display
During the MIN or MAX display, use the SENSOR key to call up/indicate the point
of time at which the MIN/MAX value has been measured
Sequence of indication:
indoor temperature Æ indoor air humidity Æ outdoor temperature Æ
outdoor air humidity Æ wind speed (MAX value only)
Deletion of the currently displayed MIN/MAX value(s):
Press the RESET key for at least 2 seconds till the values indicated
are deleted (lines appear instead of numeric values)
In the MIN/MAX mode:
Long key pressure (at least for 2 seconds) deletes the corresponding MIN/MAX
values
Switching between the outdoor temperature indication and the windchill temperature
OUT
SENSOR
IN
RESET
MIN
MAX