Operating instructions

46
Selecting the unit for rainfall
measurement
The unit for the rainfall quantity is displayed in the field „RAIN“
where you can chose between l/m
2
or mm.
Select the desired unit using the keys „+“ and „-“.
Press the „NEXT“ key. After that, you can allocate the
progression display.
Allocating the progress display
You can allocate the following display types to the graphic
progression display:
• atmospheric pressure
• interior temperature
• exterior temperature
If the progress display is allocated to one of the two temperature
displays, the symbol „ “ appears in the display field con-
cerned in addition.
Overlay/identification in the display field:
P = atmospheric pressure
O = outdoor temperature
I = indoor temperature
Select the desired allocation using the keys „+” and „-”.
Press the key „NEXT“, after that, the unit for the wind velocity
measurement can be entered.
Selecting the unit for wind velocity
The following units can be set:
km/h = kilometre per hour
m/s = metre per second
mph = miles per hour
The display will take place in the field „WIND”.
Select the unit with which you wish to display the wind velocity
using the keys „+” and „-”.
If the „NEXT“ key is pressed, the year will appear
again; the input order can commence from the
beginning again. You could now, for example,
monitor or alter the entries.
Terminating configuration mode
Press „EXIT” to complete input. This can take place at any
desired position, e.g. after setting the time etc.
-
NEXT
+
rain
quantity
unit
-
NEXT
+
assigning
progress
display
-
+
wind
velocity
unit
F
EXIT