User Manual

11
Set the day using the "+" and "-" keys.
Press "NEXT" to go to the minutes setting.
Set the minutes using the "+" and "-" keys.
Press "NEXT" to go to the hours setting.
Set the hours using the "+" and "-" keys.
Press "NEXT" to go to the setting of the
daylight-saving-time status. This is indicated
by "dSt" in the display.
Setting the status of the daylight
saving time
Press "-" to switch off the daylight saving time
or press "+" to switch on the daylight saving
time.
Press "NEXT" to go to the latitude setting.
This is indicated by "LA" in the display.
Entering latitude and longitude
Indication of the exact position of the weather
station is required so that sunrise and sunset
times can be calculated. The degree of
latitude can be set in a range between –60.0 °
and +60.0 ° . The factory setting is the position
of xxx. You can determine your position in a
number of ways:
- In the appendix is a table showing the
coordinates of many towns and cities
in the US. You can select a location
near you and enter its coordinates.
- If you have a GPS navigation system,
e.g. in the car or a mobile device, you
+
Day
–
NEXT
+
Minute
–
NEXT
+
Hour
–
Display "dSt"
NEXT
Hour
+–
Display "dSt"
NEXT