Installation Guide

ManualsBrandsEQ Acoustics ManualsAcoustic TreatmentCeiling Mount for Bass Traps

Glasswool and mineral fibre products

are NOT supported.

Installation Guide

EQ Corner Bracket Wall:Ceiling

Doc Code:

IG-CBWC

Supported Products

Page 1 of 2

www.eqacoustics.com

Spectrum 2.0 Tiles and Bass Traps

Including:

NOTE: We cannot guarantee the supplied fixings

are suitable for all ceilings. We recommend you

consult a professional before you proceed.

L5 Tile

L10 Tile

L10 Bass Trap

L10C Corner Bass Trap

68 mm

200 mm

68 mm

200 mm

Connect the panel bars to the back of the panel as shown in drawings and

L5 Tile

L10 Tile

L10 Bass Trap

Once the panel bar is fixed to the panel, attach the slide bar and strut as shown below.

Ensure the fixings mirror each other with the strut on the outer sides.

3 No. spacers on slide bar; 2 No. on panel bar

L10C Corner Bass Trap

Package Contents

2 No. Assemblies,

Supports 1 Panel.

For Larger or custom panels you may need to increase the number of fixings

2 x Mounting Bracket

4 x

2 x Slide Bar

2 x Strut

2 x Panel Bar

4 x Hinge Screws

4 x Strut Screws

6 x Panel Bar Screws

10 x Spacers

4 x Mounting Screws

Version 1.1

Self Drilling

Plasterboard Plugs

Summary of content (2 pages)

PAGE 1
EQ Corner Bracket Wall:Ceiling Doc Code: IG-CBWC Version 1.1 Installation Guide Supported Products Spectrum 2.0 Tiles and Bass Traps Including: Package Contents 4 x Hinge Screws 2 x Slide Bar 2 No. Assemblies, Supports 1 Panel. L5 Tile L10 Tile L10 Bass Trap L10C Corner Bass Trap 4 x Self Drilling Plasterboard Plugs 2 x Mounting Bracket 4 x Mounting Screws 10 x Spacers 4 x Strut Screws 2 x Strut Glasswool and mineral fibre products are NOT supported.
PAGE 2
EQ Corner Bracket Wall:Ceiling Doc Code: 4 (a) Fix the mounting brackets to the ceiling using the relevant hole centre measurements for your panel. Make sure the orientation is as shown to the right.