User guide

EQD
®
6 EQ2688
Rear View of the Product
Item Description
1 Power (AC input)
Plug-in the supplied AC Power cord and connect to the AC
input power source.
2 SERVICE PORT USB Connect this port to a PC to provide service and updates.
3
HDMI 2 Input Terminal
Connect this port to the HDMI/HDMI-DVI jack of the com-
patible equipment. *If you use HDMI-DVI
connections, please use PC Audio In for audio input.
4 HDMI 1 Input Terminal
Connect this port to the HDMI/HDMI-DVI jack of the com-
patible equipment. *If you use HDMI-DVI
connections, please use PC Audio In for audio input.
5 PC AUDIO
Connect the RGB Audio In on your computer to the RGB
Audio In on the rear of the LCD TV.
6 VGA Signal Input
Connect a 15-pin D-sub RGB cable to the RGB output of
your computer and the other end to the RGB input on the
rear of the LCD TV.
7 YPbPr Signal Input Connect this jack to the YPbPr output of A/V device.
8
YPbPr/ Audio Input
(left/ right)
Connect the Audio in cable for YPbPr from this jack to the
corresponding connectors on your A/V device.
9 SPDIF OUT Connect this port to an RCA cable.
10 S-VIDEO
Connect the S-Video cable from the compatible device to
this connector on the rear panel of the LCD TV.
11 AV
Connect the video cable from the compatible device to
this connector on the rear panel of the LCD TV.
12
AV/ S-Video Signal
Audio Input
(left/ right)
Connect the Audio in cable for AV/ S-Video from this jack
to the corresponding connectors on your A/V device.
13 TV Input Jack Connect this jack to your Cable or VHF/UHF antenna.
AC IN
PC AUDIO
PC / VGA
S-VIDEO
AV
SPDIF OUT
ANT. IN
SERVICE PORT
USB
HDMI 1HDMI 2
162345 131211978 10