User guide

EQD
®
11 EQ2688
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front of the
panel.
Changing Channels
1. Using Channel Buttons
Press CH button to change channels, and the TV
changes channels in sequence. You will see all channels
that have been memorized. Channels erased or not
memorized will not be shown.
2. Using Number Buttons
Using the remote control buttons 0-9, select channel for NTSC/ATSC/CATV.
To select 1, 2 or 3-digt channel number (e.g., Channel 110)
Press 1 1 0.
To select 4-digit channel number (e.g. Channel 23-1)
Press 2 3 - 1.
Adjusting the Volume
Press VOL +/- to adjust volume.
To turn off the volume, press MUTE.
To restore volume, press MUTE again, or press VOL +/-
directly.
Viewing the Displayed Information
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the
screen. (It shows all or some of the information about
Input, Channel, Resolution, Audio Type, etc., depending
on what input source it is in)
Selecting the Input Source
To select the TV or other external input sources connected to the TV.
1.Press the SOURCE button on the remote control.
2.Press or to select the required input source between TV, AV,
S-Video, YPbPr, HDMI 1, HDMI 2 or PC.
3.To confirm the selection, press ENTER.
YPbPrHDMI/PCAVTV
ALEEP POWER
CH
INFO
MUTE
VOL
CH
INFO
MUTE
VOL
CH
INFO
MUTE
VOL