User guide

SET-UP YOUR MONITOR: STEP TWO

Connect your monitor to the base.

Unpack the monitor and attach the base. For snap-in models tools and

fasteners are not required. If screws have been provided with your monitor

please connect the base as follows:

1. Open the box, and make sure all necessary parts are in the box.

2. Take out four screws (four M4 x 16) in the accessories bag.

3. Cover an even stable surface with a soft cloth. Place the LED/LCD

Monitor unit face-down on the cloth. screw four screws in clockwise

direction as shown at

M4x16, 4PCS