User's manual READ AND SAVE THIS INSTRUCTION FOR FUTURE USE Model NO：YQ-T4500
-02- -03-
-04- -05-
Product introductions Speaker Display Heart beat sensor Speaker Right handlebar Left handlebar Right riser Left riser Safety lock Motor top cover Strake Running belt Right tailstock Riser side cover Left tailstock -06- -07-
Installation procedure 1)Open the package, take the host out of the packing box and put it flat on the carpet or cushion. 2) As shown in step ① in the following figure, lift the riser up to the limit point. As shown in step ②③ in the figure, use the "6MM hexagon wrench" to move the four "M8*16" hexagon socket head full-thread screws to the left and The right riser is locked.
4) As shown in step ⑥, after confirming that the riser is locked, fasten the lower cover of the riser on After you folded the treadmill. Fix one side of the base with your feet, and pull the armrest back with the left and right risers respectively. both hands to tilt the whole machine backward. 4. The whole machine moves.
Stretching exercise Instructions It is best to stretch first no matter how fast you walk. It’s easy to stretch for warm muscles. So warm Display and key distribution: up through walking for 5-10mins. Then stop and stretch as follows five times for 10 seconds or more 1、On the electronic watch: main window (time, calories, distance) + heart rate window (heart rate, one each leg. Do it again after your workout.
Adjust the slope (if the machine has a lifting function) Electronic surface board: Short press the target key to switch the function to slope adjustment (the main window or the knob shows the slope), then short press + (-) for slow adjustment, long press + (-) for fast adjustment Knob: Short press the start key to switch the function to slope adjustment (the main window or the Safety lock function In any state, pull off the safety lock, the window displays show "Er07", and the buzzer bi-bi-bi rings three ti
Language recognition instruction Setting speed Set speed to thirteen Setting speed Set speed to fourteen Setting speed Set speed to fifteen Setting speed Set speed to sixteen Awakening command Setting speed Set speed to seventeen Start treadmill Setting speed Set speed to eighteen Setting speed Set speed to nineteen Setting speed Set speed to twenty Increase incline Incline Speed up,Faster Decrease incline Incline down,Lowerincline Slow,Speed down Setting incline Set incline to zer
Setting incline Set incline to seventeen Setting incline Set incline to eighteen Setting incline Set incline to nineteen Setting incline Set incline to twenty Reduce volume Volume down Minimum volume Minimumvolume Maximum volume Maximumvolume Increase volume Volume up Time target running Run five minutes Time target running Run ten minutes Time target running Run fifteenminutes Time target running Run twenty minutes Time target running Run twenty five minutes Time target running R
It will be returned to normal after a few minutes of no-load rotation if deviation is caused by man- 1.lubrication The running is used for a period of time, it must be lubricated with special methy silicone oil. Advice Use time less than 3 hours per weeks lubricate once every 5 months Use time 4-7 hours per week lubricate once every 2 months Use time over 7hours per week lubricate once a month made.
Service commitment G series electric treadmill, If no-human damage, can be free for users to come to repair or provide accessories in one year use normal circumstances. After the warranty period can be appropriate to provide free labor maintenance cost. Spare parts prices from preferential. Please refer to the warranty card for details. Important information The warranty card of this machine comes with each product. Which is filled by the dealer. Free replacement parts within the warranty period.
