User's Manual

①
②
③
④
⑤
Installation procedure
1)Open the package, take the host out of the packing box and put it flat on the carpet or cushion.
2) As shown in step ① in the following figure, lift the riser up to the limit point. As shown in step
②③ in the figure, use the "6MM hexagon wrench" to move the four "M8*16" hexagon socket head
full-thread screws to the left and The right riser is locked.
3)As shown in step ④ in the figure, press down the electronic watch in the direction as shown in
the figure, (do not press the communication line when the electronic watch assembly is put down
to prevent damage to the line when installing the screw), as shown in the step ⑤ in the figure, use
"6MM "Inner hexagon wrench" lock the electronic watch with the left and right risers with two
"M8*16" hexagon socket head screws.
-09--08-