User's Manual

Adjust the slope (if the machine has a lifting function)
Electronic surface board: Short press the target key to switch the function to slope adjustment (the
main window or the knob shows the slope), then short press + (-) for slow adjustment, long press
+ (-) for fast adjustment
Knob: Short press the start key to switch the function to slope adjustment (the main window or the
knob shows the slope), then turn the knob to adjust the slope, and the voice command to adjust
the slope
Exercise mode selection
In the stopped state, short press the target button to enter the countdown->countdown distance-
>countdown calories->P1->P2->P3...->P20->free run->countdown. The countdown mode can be
set to countdown value, Pxx mode is a fixed preset duration
Plus and minus key (knob) function switch
Short press the target key to switch, if the machine has a lift function, switch the plus and minus
key (knob) functions (speed adjustment, slope adjustment). When the main window or the knob
shows speed, it is the speed function, and when the slope is displayed, it is the slope function
Knob voice recognition function
1、Wake-up word: Hey Coco
2、Start the treadmill: start the treadmill, start running, I want to run, run for 5 (10\15\20\25\30)
minutes, run 1 (2\3\4\5) kilometers, goal 1 (2\ 3\4\5) one hundred kcal
3、Accelerate: speed up, faster, accelerate
4、Deceleration: slow down, slow down, decelerate
5、Speed adjustment: speed 1 (2\3\4\5\6\...\18)
Parameter adjustment
1、Enter the user parameter setting interface:
Unplug the safety lock and long press the start key (knob and electronic surface panel, the same
below) to enter the parameter setting interface. After entering the user parameter setting interface,
the knob displays Uxx, the heart rate window of the electronic surface board displays Uxx, and the
main window of the electronic surface board displays the parameter value
2、Parameter switch:
After entering the parameter setting interface, short press the start key to switch parameter items
3、User parameter description:
Parameter 2: Display brightness, 1 is the darkest -> 5 is the brightest
Parameter 3: Buzzer volume, 1 minimum sound -> 5 maximum sound
Parameter 6: switch between metric and imperial systems, 0 is metric system, 1 is imperial
system
Parameter 7: Accumulated mileage
Safety lock function
In any state, pull off the safety lock, the window displays show "Er07", and the buzzer bi-bi-bi rings
three times. If motor is in operation, then motor emergency stop. When the safety lock falls off,
start and other operations cannot be performed.
-15--14-