Super Ashen Model: 826 OWNER’S MANUAL Please read the instructions carefully and keep for future reference. Information may be updated from time to time so please refer to the manual online for the latest version of the manual.
TABLE OF CONTENTS Please read the Owner’s Manual carefully before using your Fully Automatic Washer Warranty saran smn sans aan naan 2 Exclusions “3 Technical Data 4 Important Safety Instructions. . «ues veers iim IRAs iar sass ss ss ams na rma savannas 5 Helpful Hints «occurrence cc revision esc rmn rn nmr nnn nn mmm Anne 6 Diagram of the Washer . Installation Instructions. uuu.
INT Congratulations on your new Super Washer! In addition to its contemporary design, this Is a highly sophisticated engineered product that will give you many years of satisfaction. Here are some of the best reasons for buying your Super Washer 1. Easy Operation This appliance is simple to use as a washer. 2. Efficient Operation With a high spin speed of 1400 rpm, more water is extracted, allowing shorter dry times. 3.
WARRANTY INFORMATION Your appliance is protected by this warranty under normal, personal, family or household use for 1 Year Parts & Labor and limited commercial use (90 days) In USA and Canada.
EXCLUSIONS In no event shall Consolidated Brands be liable for incidental or consequential damages or for damages resulting from external causes such as abuse, operation misuse, neglect, alterations, normal wear and tear, incorrect voltage or acts of God. This warranty does not cover service calls which involve defective workmanship, damage due to other products while combined use with this product or materials covered by this warranty.
TECHNICAL DATA J] Type Front loading washing machine Model 826 A. Width 23 6/600 Dimensions B. Height-overall {inches/mm) C. Depth D. Depth with door open Rated voltage 10A Water pressure (simpatico) 1.00 Wash capacity (Ib/kg) 15/6.8 Net weight (Ib/kg) 152/69 Spin revolution (rpm) Max. 1,400 Power Washing 150 consumption Spin 500 Ww) Wash heater 1,000 @.
IMPORTANT SAFETY INSTRUCTIONS Your washing machine has been built in compliance with safety regulations, to protect you and all your family. WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2.
SAFETY “The made! number and the serial number are on the A CAUTION A able rafted to tha back of the unit. Tess numbers are also available on the front of the cabinet behind Loony TE the door IEE You should note the mods! and serial numbers of this unit In the space provided. Metal this bidet CAUTION: TO REDUCE THE RIK permanent record of your purchase to aid in TK oT INVENT | Identification In the event of theft PARTS SNIDE. REFER BERvCN® TO | MODEL# SERIAL# HELPFUL HINTS 1.
DIAGRAM OF THE FULLY AUTOMATIC WASHER Detergent Dispenser In =z — Work Top fA = 132 Control Panel Drum 4 —— Cold Water po inst Val Leveling Feet ee " ve (x4) Hot Water In lat Valve Power Cord Drain Hiss. HR & J Shipping AR A Bolts EI } Pump Filter (x3) : Door Release Lever Factory supplied accessories Blanking Caps 3 Cold/Hot water hoses (To cover shipping bolts hols) ~O NOTE + Contact Customer Service If any colorlessness are missing.
Handling Please handle the machine carefully and use appropriate means while lifting and moving the machine so that it does not get damaged. Do not drag the machine on your floor. Do not hold on to protruding parts when lifting. Disposing of the packing The shipping package has protected your new appliance on its way to your home. All packaging materials are non-pelleting and recyclable. Please dispose of packing material according to local environmental regulations.
UNPACKING, LEVELING & POSITIONING Remove the packing and check that the Super Washer is undamaged. If you have any doubt, do not use the Super Washer and call Customer Service. Keep all packing parts (plastic bag, foam rubber, screws, etc.) out of the reach of children since they could be dangerous. Important: The inside of the Super Washer consists of a free floating drum that is affixed with shipping bolts at the back of the cabinet during transport (Fig.1).
ELECTRICAL CONNECTION Connect the plug to a power outlet 110V / 80Hz with minimum 15 Amps. Make sure that the voltage and frequency available correspond with those stated on the serial number plate located on the machine. Do not use adapters or extension cords since they could result in overheating and bum out.
PLUMBING CONNECTING TO THE WATER FAUCET SP So To connect the hoses to the water faucets: Conn act the straight end of each hose to the cold ' Pe Turn the fittings by hand until they are tight, and then Fig.6 tighten them by Just an additional two-thirds of a turn with a pier. Do not over tighten the fittings. 1+ They can be damaged. I When done, pull the water hoses up and down to check if they are properly connected.
SPECIAL INSTALLATION REQUIREMENTS MINIMUM CLEARANCE OTHER THAN ALCOVE OR CLOSET INSTALLATION Minimum clearances to combustible surfaces: 2" (5 cm) clearance both sides and 3" (7.5 cm) rear. BUILT-IN, RECESSED, CLOSET AND ALCOVE INSTALLATION The Super Washer may be installed in a built-in, recessed area, closet or alcove. The installation spacing is in inches and is the minimum acceptable. Other installations must use the minimum dimensions indicated.
PROGRAM SELECTION CHART WASH CYCLES ms script each far Tem) 1. NORMAL previewing OTC) Warm / 1200 51 mind 2. Prewash+Heavy Platitude ) Cold +Hot / 1400 75 mind 3. Heavy re) Hot / 1400 51 mind 4.ECO dare. Cold /800 31 mind 5. Quick 20 pad: Cold / 1200 20 mind 6. Baby Light fabrics Warm / 800 41 mind 7. Delicate Silk, Polyester, stc. Cold / 800 36 mind 8. Wool Woolens Cold / 500 36 mind 9. Quiet 60 Mixed cottons Cold / 800 31 mind 10. Sanitize 165 Broadsheets, etc. Hot / 1200 69 mind 11.
EATING INSTRUCTIONS Make sure the Washer is muted off. (Power Indicator light should be off). Separate clothes by type, color and degree of soiling. For small items such as sacks, children’s garments and small towels please use a Washing Net Bag. 4. Load clothes of the selected type loosely into the drum. 5. Close the Washer door. You will hear a click when it is correctly closed. Use High Efficiency {HE) detergent about 1 tablespoon. Add detergent to Dispenser A.
Buttons Introduction [1] Max Extract [2] extra Rinse (3) No Spin Color LED Display (5) Delay Start button [8] chime bunion Program Dial Start/Pause button Child Lock 11) Power To extend the duration of final spin cycle by 30%. Press this selection button to add once more rinse cycle to the selected wash program. If you want fo soak your clothes before the spin cycle, press this button to eliminate the spin function. This will keep the clothes in the rinse water after the last rinse cycle is finished.
Display Panel Symbols Memory Function Door Unlocked / Locked Washing stages Chime On/Off Cycle countdown Spin Delay start on Water temp Number of rinses How to Run Wash cycle 1. Press POWER button 2. Press START Default cycle is NORMAL If required, you can change to desired washing cycle based on type of clothes by rotating the Program Dial knob. How to stop the wash cycle The wash program can be stopped at any time.
| We" Before loading clothes and sheets into the appliance, remove as much pet hair as possible in order to prevent buildup and clogging of the drain pump. Wipe the surface of clothes and sheets with a lint roller or a damp rubber glove to easily remove pet hair. After the end of the wash cycle, run a quick wash cycle without clothes. After the cycle ends, wipe down the drum with a damp cloth to collect any pet hair on the drum surface.
LLL Ee “Your Washer has been designed to operate with easy maintenance. Follow these simple maintenance procedures to obtain optimum performance: 1. Ensure that your machine was installed according to the comet installation procedures detailed in this Manual. 2. Do not uss solvents either to clean the machine or to wash clothes. 3. Keep the inside of the detergent dispenser clean. Cleaning the coin trap Switch off the Washer, allow the water to cool down. Open the service flap by using a finger.
Cleaning the water inlet filter If water is very hard or contains traces of lime deposit, the water inlet fitter may become clogged. It is therefore a good idea to clean it from time to time. Tum off the water tap. ( Flg.19) Unscrew the water Inlet hose. (Fig. 20) -Clean the filter using a hard bristle brush under the running water. ( Fig. 21) Insert the fleeter Intel the valve and tighten up the inlet hose. ( Fig. 22) | Jo Fig.18 Fig.20 Fig.
Clean Door gasket Clean the door gasket once a month to prevent buildup of dirt in the door gasket. Open the door, and then empty the drum. Combine 3/4 cups of liquid chlorine bleach and approx & pints i of warm tap water. Il = Turn over the rubber door gasket. Wearing rubber gloves, use a soft, clean cloth dipped in the water and bleach solution to clean the gasket. Let stand 5 minutes, and then wipe up and dry well. Door gasket Put the rubber gasket back into position. /A\ CAUTION 1.
STAIN REMOVAL CHART Blood Rinse or soak fresh stain In cold water. Work detergent into any remaining stain. Rinse. If stain persists, put a few drops of ammonia on stain and repeat detergent treatment. Rinse. If necessary bleach. Burn Marks Rinse or soak in cold water. Work detergent into stain. Rinse. Bleach, if necessary. Stain may be impossible to remove. Candle Wax Scrape off excess. Place stain between clean white blotters or several layers of facial tissues. Press with warm iron.
Ink Some ball-point inks are set by water. First test a scrap of cloth. Sponge stain repeatedly with acetone, acyl acetate or rubbing alcohol. Hair spray is effective. Launder. Bleach if necessary. Use acyl acetate on triathlete, male, anodyne and revel. Use acetone on other fabrics. NOTE: Some inks cannot be removed. Ketchup Scrape of excess. Soak in cold water 30 minutes. Pr-treat with a detergent paste. Launder. Mildew Brush off surface growth to keep mold spores from spreading.
Vallejo iN OPTING In most cases, when your Super Washer falls to work, the problems arising can be easily solved without having to call for a technician. Before calling for assistance, always check these points. Problem Solution Will not start = Make sirs the door is firmly closed. E -i * Make sure your Washer is plugged in. + Make sure the water source faucets are open. +» Make sure to press the Start/Pause Button to start your Washer. + Make sure the Child Lock Is not activated.
DIAGNOSTIC MENU DIAGNOSTIC MENU Description Component Door close Door Switch Drain Drain Pump Water inlet Inlet Valves Water overfill Pressure Switch Motor Motor +Electronic Module Washing heater failure Washing heater Water level failure Water level sensor Communication between Communication display & electronic module | Cable Information or Parts: 24