Owner's manual

Storage
If you will not be using the unit for an extended period of time (more
than a few weeks) it is best to clean the unit and dry it out completely.
Prepare the unit for storage as follows:
Unplug the unit, remove hoses and window kit, and store with
the unit.
ATTENTION:
The evaporator inside the machine has to be dried out before the unit
is packed to avoid component damage and mold. Unplug the unit and
place it in a dry open area for a few days to dry it out. Another way to
dry the unit is turn it on and operate it in Air mode on low speed.
Error Codes
Error
Codes
Ambient temperature
sensor failure
Coil temperature sensor
failures
Water tank is full
Check connection or replace
it. Clean or replace the
temperature sensor
Empty the water tank
E0
E1
E2
Ft
Communication faults
between main PCB and
display PCB
Check the wire harness of
the display PCB for damage
Check connection or replace
it. Clean or replace the
temperature sensor
15
Drain any water from the unit and dry it completely.
Store the unit in an upright position, in a dry indoor space.
Congratulations on your purchase. We hope you enjoy your new
appliance and it gives you many years of joy.
Please do not hesitate to contact us, if we can assist you any way.