Installation Guide

6
dry.
·Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
·When moving the refrigerator, do not tilt the refrigerator
beyond 45° from upright position.
CLEANING BEFORE USE
After removing all of the packaging materials, clean the inside
of your refrigerator before using it.
SPACE REQUIREMENTS
WARNING: Keep flammable materials and vapors, such
as gasoline, away form refrigerator.
Fail to do so can result in death, explosion, or burns.
·To ensure proper ventilation for your refrigerator, allow for
200mm space on each side between walls, 100mm space
between back of your refrigerator and the wall, and 300mm
space between counter top and the roof or ceiling.
·If you are installing your refrigerator next to a fixed wall,
leave sufficient space on the hinge side to allow for the door
to swing open.
·Never install your refrigerator near heat source and direct
sun shine.
ELECTRICAL REQUIREMENT
WARNING: DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.