EQUATOR SERVICE MANUAL AND SPARE PARTS CATALOG First Edition - October 2003 BUFFET CART MODELS: CM 3000 www.EquatorOnline.
TABLE OF CONTENTS WARRANTY 1 SERVICE HINTS 2 TECHNICAL DATA 4 WIRING DIAGRAM 4 EXPLODED VIEW 5 PARTS LIST 6
WARRANTY INFORMATION Your Equator appliance is protected by this warranty under normal, personal, family or household use (1 Year), and limited commercial use (90 days) in the USA and Canada. WARRANTY SERVICE WARRANTY Equator Corporation undertakes to the consumer-owner This warranty is given by: Equator Corporation, to repair or, at Equator Corporation’s option, to replace Equator Plaza, any part of this product which proves to be defective in 2801 W. Sam Houston Pkwy. N.
DISASSEMBLY AND ASSEMBLY ENSURE APPLIANCE IS DISCONNECTED FROM THE ELECTRICITY SUPPLY BEFORE DISASSEMBLING. NOTE ALL CONNECTION DETAILS AND ROUTING OF LEADS BEFORE DISASSEMBLING. Numbers appearing in the text rater to illustrations and parts list numbers. A. SLIDING TABLETOPS Slide both tabletops open. Remove cover caps 130 end the two screws securing handle 105. Withdraw the handle from the tabletop assembly.
D. MIDDLE AND BOTTOM ELEMENT ASSEMBLY / NEON 1. Remove rear cover strip 510 as shown in C.1. And disconnect the middle shelf element leads 113 from terminal block 120 (See note in C. 1.) 2. Remove the two screws securing the element assembly through the rear panel of the cabinet, and two screws from under the front edge of the shelf (bottom element front screws are under the front of the cabinet,behifld the bottom. rail) — see fig.1. 3.
F. CABINET ITEMS 1. Magnetic catches 111 are a push-fit in front top panel 109. 2. To remove front top panel 109, remove both sliding tabletops completely (see A.1.) and magnetic catches 111. Drill out the rivet at each end of the front slide panel using a 3mm bit. Use extreme care when drilling Withdraw leg top caps 108, and then remove the front top panel assembly. Refit in reverse order. 3. Castor wheels 116 are a push-fit onto castor wheel inserts 117.
5
SPARE PARTS LIST ITEM 101 103 104 105 106 107 108 109 110 111 112 116 117 118 120 121 122 123 124 125 126 127 129 130 150 508 512 DESCRIPTION GLASS DISH & LID GLASS DISH HOLDER TABLE TOP COVER TABLE TOP HANDLE TABLE TOP SLIDING BLOCK TOP ELEMENT ASSEMBLY LEG TOP CAP FRONT TOP PANEL GROMMET SLEEVE MAGNETIC CATCH (FS10) MID ELEMENT ASSEMBLY BRUANDET CASTER (4 PACK) CASTOR INSERT NEON ASSEMBLY TERMINAL BLOCK STRAIN RELEASE BUSH MAINS CABLE DOOR ASSEMBLY RIGHT DOOR HANDLE PAIR DOOR ASSEMBLY LEFT DOOR HINGE PIN
