Installation Guide

0.4 inch (1 cm)
H 32.3” (82 cm)
W 23.4” (59.5 cm)
D 22.8” (58 cm)
0.4 inch (1 cm)
0.4 inch (1 cm)
For installing the appliance as built-in, ensure that there is adequate space between the
unit and the cabinet. There should be a minimum of 0.4 inches (1 cm) on both sides,
on top and at the back.
Installation Specifications for Built-in
Install and Remove Drawers
Install: Place the rail of the drawers in the slot of the cabinet rail to push in the drawers.
Both rails must be in parallel.
Remove: At the same time, press down the locking bar A at the left side and lift up the
locking bar B at the right side. Then pull out the drawers from the cabinet.