Use and Care Manual

Operating the Cooktop
Ensure the cooktop is plugged into an electrical outlet. Place suitable cookware onto
the cooktop.
Main Power
Press the Power icon for three seconds. This powers on the whole cooktop.
You will hear a beep and see flashing lines - on the display next to all the burners.
Burners
To select the burner to use and the power level, press the burner icon for the desired burner.
You can change the power levels by sliding your finger across the slider or by pressing
a number.
Multiple Heating Zones
The center burner has multiple heating zones, allowing you to use small, medium or large
pots. Depending on the size of the cookware, the heating zone can be selected to match the
size of the pot to ensure safe and efficient cooking.
Press the icon to select the center burner. The smallest middle circle will heat up.
Then press the multiple heating zone icon and the next circle will heat up; press it once
more and all the heating zones will be heated. You can see the red heating element get
activated as the heating occurs.
Bridge (2 burners)
Press the bridge icon if you want to use a large pan over the two left burners.
To turn the bridge off, press the icon for 2 seconds.
Caution! When using the bridge feature, use cookware that is large enough to cover
both the burners that are on.
Residual Heat Indicator
When the cooktop has been operating for some time, there will be some residual heat which
is indicated on the display as “H” .
7