Use and Care Manual

Timer
Press the Timer icon to activate the timer. Each time the timer icon is pressed, an indicator
light around the icon illuminates, which indicates the position of the different burners. Once
the burner is selected, press the numbers on the control panel to set the number of minutes
to set the cooking time. The time will show on the digital display and the numbers will count
down on it as the time progresses. If more than one burner is selected, the time on the
display will be that of the least number of minutes.
To cancel the timer, press the timer icon to select the burner to cancel. Then press the
number “0” two times on the control panel. Or press the timer icon for 3 seconds and all times
for all the burners will be cancelled.
Note: Each burner on the cooktop is equipped with a safety temperature sensor which
switches o ffthe cooktop if there is excessive heat. This is to protect the electronics from
overheating. Wait for the cooktop to cool down before using it again. If any cracks appear on
the surface of the cooktop, immediately disconnect it from the power.
If a cooktop is left on accidentally, it will automatically be switched o ffafter a period of time
has elapsed.
8
Child Lock
To ensure the safety of children, the cooktop controls can be locked so children cannot
change the settings.
To lock: hold the Child Lock icon for 3 seconds until “L0” displays and the rest of the icons
are disabled except the On/Off Power icon. To unlock: hold down the Child Lock icon for
3 seconds and the cooktop will return to normal.
Pause
Press the Pause icon to stop heat to the burner. Then press the icon again to
resume cooking. The Pause feature remains active for 2 hours and then the burner
automatically turns off.
Keep Warm
Press the Keep Warm icon to allow the burner to be on at a low temperature and to keep the
food warm. The display will show .
Press the icon again to cancel the Keep Warm feature.
QR Code
Scan on your cell phone to register Warranty, obtain Specifications and Owner’s Manual.