Owner's Manual

12
VENTLESS (CONDENSING) DRY
VENTED (HOT AIR) DRY
1. ENSURE METAL VENT COVER (1) IS INSTALLED OVER
EXHAUST FAN AS SHOWN IN FIG.8
2. Power on the machine
3. Press "Dry Only" button to set the machine on drying cycle.
4. Hold Vented/Ventless button for 5 seconds
5. symbol will appear on the screen which confirms that the
machine is in Ventless mode.
6. Press START to run dryer in Ventless mode.
Ventless dry (condensing) uses cold water to dry the clothes. The cold water mixes with the
hot air in a condensing chamber within the machine. Please ensure the cold water faucet is
open during ventless dry mode.
Note: Slight condensation can occur at soap dispenser and will evaporate.
This is a normal feature.
Use dryer in Ventless Mode:
1. ENSURE METAL VENT COVER OVER THE EXHAUST FAN IS REMOVED.
2. Press "Dry Only" button to set the machine on drying cycle.
3. Hold Vented/Ventless button for 5 seconds.
4. symbol will appear on the screen which confirms that the machine is in vented mode.
5. Press START to run dryer in vented mode.
Use dryer in Vented mode:
Icon for Ventless Icon for Vented
as shown in Fig.9
, with screws provided for
vent cover.
Washer-Dryer.
!
Fig.9
For venting function the machine vents the moist hot air out of
the unit and requires a vent hose (standard 4" diameter) to
be installed.
Dryer can be used in Ventless or Vented mode