Model MJ-9000V Model MJ-9000VG (Greystoke Model) Installation Manual Website: http://www.MajesticAppliances.com Check this website under Models for the most up-to-date manual.
Welcome... Congratulations. Welcome to the growing family of Majestic™ Appliance owners. By choosing a Majestic Appliances model as your laundry appliance you not only found the best in reliable technology, but above all you have found a faithful and untiring convenience appliance. Your machine is strong, reliable and long lasting. All those qualities which have made the Majestic™ trademark famous the world over. Above all, Majestic products are easy to use.
Installing/Removing Getting things ready to install your appliance Unpacking, Inspecting, Electricity, Closets/Alcoves, Plumbing, Venting Unpacking • Check the packing box for external damage. It is your responsibility to register any damage with the freight company delivering the product. • Remove the strapping, then slide the cardboard surround off the machine. Remove the foam protecting material and the plastic bag. • Write down the serial number from the box or the back of the machine.
REMOVING THE FOAM DRUM SUPPORT REPLACING THE METAL BOTTOM PAN. WARNING!!! IN ORDER TO REMOVE THE FOAM DRUM SUPPORT AND REPLACE THE METAL BOTTOM PAN, THE BOTTOM OF THE MACHINE MUST BE ACCESSED. SHIPPING BOLTS MUST REMAIN IN THE APPLIANCE WHILE ACCOMPLISHING THIS STEP IN THE PREPARATION PHASE OF THE INSTALLATION.
Installing/Removing Getting things ready to install your appliance (continued) Electricity Make sure that the voltage and frequency available correspond with the values stated on the data plate located at the back of the machine and that the electric system is dimensioned to withstand the maximum current shown on the data plate.
Installing/Removing Getting things ready to install your appliance (continued) Plumbing - Water, Drains WATER CONNECTION 1. This appliance can be used with either hot/cold or cold/cold connections. 2. The hoses supplied have either a straight end or an elbow end. The elbow end is meant to connect to the washer. Be sure to connect the hot hose to the hot side of the appliance itself, the cold side to the cold connection. (See picture) The straight end to the 3/4” BSP standard hose bib thread. 3.