User guide

Equator Room Analysis User Guide v2.0

Monitor Features

Digitally-Controlled Transducers™

An on-board CPU digitally adjusts the driver components to exacting specifications. Other

benefits include a continuously adjusting crossover (no preset filter slope) and the ability to

perfectly match every transducer in the system at our factory for use with 2.0, 2.1, 5.1,

6.1, 7.1, and 8.2.

Zero-Point Reference™ Coaxial Design

Two drivers, one sonic point source, allowing for perfect audio alignment between the low

and high frequency transducer on the X, Y, and Z axis. The result: superb imaging,

enhanced off-axis response, and exceptional midrange clarity.

High Definition Titanium Compression Horn Driver

The custom titanium compression driver delivers exceptionally precise, detailed, and

accurate high frequency response as well as providing high SPL. The horn’s uniquely

designed throat section creates an extended horizontal high frequency dispersion pattern,

and provides superior off-axis response in both the vertical and horizontal planes.

Fiberglass-Impregnated Low Frequency Driver

Fashioned from a blended fiberglass/pulp mixture, the woofer cone material was chosen for

its’ strength and damping characteristics.

Multi-Function Status Display

The multi-segment LED allows you to monitor power protection, network communication,

volume, and compression/limiting.

Cast Aluminum CAD Coaxial Driver Basket

A performance-enhancing top plate for the woofer’s magnet assembly cools the voice coil

and provides a significant increase in midrange performance. The driver basket also serves

as a heat sink, allowing the speaker to run cooler at high power levels.

13-Ply Baltic Birch Resonant Damping Cabinet

The enclosures sides and back are constructed from 13-Ply Baltic Birch; the sculptured front

baffle is 1” HDF. Together they provide the optimum combination of acoustic damping and

enclosure strength. All are equipped with rubber pads and OmniMount™ compatible

mounting holes:

Q8 & Q10 use OmniMount™ model 60.0WBB.

Q12 & Q15 use OmniMount™ model 120.0WBW

The Q12 and Q15 are also equipped with side-mounted handles for easy transportation.