MODEL: SP 818 & WP 818 SAVE THESE INSTRUCTIONS
Automatic adaption The intelligentized control system could be adaptive to different conditions of temperature, voltage and humidity to automatically correct remaining time display. 7 wash programs You can choose your desired program according to the soiled level. Such as, strong wash, normal wash, economy, rinse, glass, rapid and pre-wash etc. Memory function The memory function could automatically set the frequently used program as current program, it make operation much more easier.
WARRANTY INFORMATION WARRANTY Equator Corporation undertakes to the consumer-owner to repair or, at Equator Corporation's option, to replace any part of this product which proves to be defective in workmanship or material under normal personal, family or household use, in the USA and Canada, for a period of one year from the date of original purchase. For commercial use, the product is warrantied for a period of 90 days.
..................1 Thank you for buying this product. As a home appliances producer, we are proud of our quality products and we are committed to providing dependable service. We are able to utilize our global resources in creating innovation that makes housework lighter and easier, and provide a truly comfortable home for you to relax and enjoy. This manual contains sections of Safety Instructions, Operating Instructions, Installation Instructions and Troubleshooting Tips etc.
Under certain conditions, Hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the dishwasher turn on all hot-water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time. This appliance must be grounded.
To get the best performance from your dishwasher, read all operating instructions before using it for the first time. 1 3 2 4 I nters e DE LAY 5 N orm al Eco n o m y R in s e Li gh t Fa st w as h S o ak PR O GR Add Rin se Aid START POWER 7 8 AM 6 9 1 Delayed Start Button: Press this button to set the delayed 6 Power On indicator light: Comes on when the power is 2 7 Door Lock: Pull it to open the door. hours for washing. turned on.
65C 150F 55C 130F 45C 115F 45C 115F 45C 115F 35C 95F 45C 115F For the heaviest soiled loads, such as pots,pans,casserole dishes and dishes that have been sitting with dried food on them for a while. Pre-rinse (115°F ) Wash (150°F ) Rinse Rinse (158 °F ) Drying. 4/20 gr. For normally soiled loads, such as pots, plates,glasses and lightly soiled pans. standard daily cycle. Pre-rinse Wash (130°F ) Rinse Rinse (158 °F ) Drying. 4/20 gr.
YOU MAY NOT ADD TOO MUCH DETERGENT TO PREVENT THE FORMATION OF DEPOSITS BECAUSE OUR DISHWASHERS HAVE SPECIALLY-DESIGNED WATER SOFTENERS. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the" Wash Cycle Table".Our dishwashers use less detergent and rinse aid than conventional dishwashers. Generally, only one tablespoon of detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below. Full 3 / 4 full 1 / 2 full 1 / 4 full - Should refill to eliminate spotting Empty The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and saucers, as well as plates, small bowls and shallow pans(as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water.
Silverware should be placed in the silverware basket with handles at the bottom: If the rack has side baskets, the spoon should be loaded individually into the appropriate slots, Especially long utensils should be placed in the horizontal position at the front of the upper rack.
It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings. To remove the spray arm, screw off the nut to take out the washer on top of the spray arm and remove the arm. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing them thoroughly. Filter assembly For best performance and results, the filter assembly must be cleaned.
This dishwasher is designed for operation on an adequately wired individual 120VAC, 60HZ, and connected to an individual, properly grounded branch circuit, protected by a 15 or 20 amp circuit breaker or time-delay fuse. If the electric supply provided does not meet the above specifications, it is recommended that a licensed electrician install an approved outlet.
The water supply to the appliance can also be connected to the house hot water line(centralized system, heating system),as long as it does not exceed a temperature of 60 C. In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced. The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.
' ' Fuse blown, or the circuit breaker acted Replace fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher Power supply is turned off Make sure the dishwasher is turned on and the door is closed securely. Make sure the power cord is properly plugged into the wall socket. Start button isn"t pressed Pressed the Start button. Overflow The system is designed to detect an overflow.
Combination of soft water and too much detergent Use less detergent if you have soft water and select a shortest cycle to wash the glassware and to get them clean. Tea or coffee stains using a solution of 1/2 cup of bleach and 3 cups warm water to remove the stains by hand. You have to wait for 20 minutes after a cycle to let the heating elements cool down before cleaning interior; otherwise, burns will happen.
Fig. 1 Fig.
