System Instruction

56
Equil
®
Patch Insulin Pump System
8 Replacing the Patch
Pump
This section explains how to connect a
new patch pump to the PDA or replace an
old one.
1
From the Home Screen, choose the
Actions button and then the New Pump
button to enter the New Pump Wizard
a) If this is your first time using the wizard
to connect your pump, the wizard will
start with Figure 70. Apply a new infusion
set(Chapter 7.3), Assemble a filled
reservoir and a charged battery to the
pump as shown in the animation (Figure
73). Press Continue to go to the next page.
Before continuing, please make
sure you are familiar with frequently
used pump setup operations such as
installing/removing an infusion set,
filling a new reservoir, and assembling/
disassembling the reservoir (Chapter 7).
Warning
！