User`s guide

Using the Louth VDCP DM
This section tells you how to use the Louth Video Disk Control Protocol (VDCP)
Device Manager (DM).
(Refer to the Tektronix Profile User Guide for detailed information on the Profile
VdrPanel setup.)
Setting up the Louth VDCP DM to Run
The following program must be running before you can set up the Louth VDCP
Device Manager:
Bcserver.exe
Connecting to the Tektronix Profile
The PDR must be running VdrPanel for the Louth VDCP DM to connect to it.
VDR panel must have one panel open for each channel that will be controlled by
the DM, with each panel running the Louth Automation protocol. To set this up,
run VdrPanel. (VdrPanel provides you with a VTR-like interface, complete with
transport controls, to directly manage media operations.) (Refer to the Tektronix
Profile User Manual for further VdrPanel setup instructions.)