User`s guide

Louth VDCP DM Error Messages
The following table describes Louth VDCP DM error messages.
Error Message Description
<<<Received Msg -- Message Type = %s - NOT
TRAPPED
The DM received a message from BCServer that it
does not know how to handle.
Can't establish connection to any channel. Good Bye!
The DM cannot connect to any specified channel.
Check the Profile file, the serial connections, and the
VDCP server to make sure everything is correctly
configured.
Can't establish connection to the server. Good Bye! The DM cannot connect to the BCServer. It must be
restarted.
Channel '<channelname>' is back online Channel was offline and is now online again
Channel '<channelname>' is offline Channel went offline. Check the VDCP server setup
and serial connections.
Could not Cue event on the specified channel DM could not find the channel on which to cue the
event.
Could not Play event on the specified channel DM could not find the channel on which to play the
event.
Could not Stop event on the specified channel User tried to stop an event and the device told the
DM the attempt failed.
Cue of event ‘<eventname>’ failed on channel
‘<channelname>’
A clip that the user tried to cue could not be cued.
DEVICE: Channel <name> is back online The channel named <name> was offline but has
been brought back online.
Error Connecting to Channel :<name> The DM could not connect to the specified channel.
Check the Profile file, the serial connections, and
VDCP server (on the PDR, VdrPanel) to make sure
everything is correctly configured.