Manual Pocket KVM Switches USB + Audio english www.equip-info.
Manual_Page 2 Index 1. 2. 3. 3.1. 3.2. 3.3. Introduction ____________________________________________ 3 Out-of-the-box Installation ________________________________ 3 Easy Operation __________________________________________ 5 Face-panel buttons ______________________________________ 5 Keyboard Hotkeys ______________________________________ 5 KVM Switcher Software (only for Windows platform) ____________ 6 www.equip-info.
Manual_Page 3 1. Introduction The USB Pocket KVM Switch 2/4 Port w/Audio from equip allows you to access, control, boot and reboot multiple USB-enabled computers. The independent audio/mic switching function allows an uninterrupted audio experience on a same connected computer even when you switch to another computer.
Manual_Page 4 After the installation is completed, you will see a KVM Switcher icon on the system tray of your window desktop. Just right click to evoke the operation menu and double-click to evoke configuration box. For operation details of the KVM Switcher software, please refer to the Operation Quick Reference.
Manual_Page 5 3. Easy Operation There are three methods to control your KVM Switch for PC and Audio/Mic channel selection: using (1) the face-panel push button (2) a hotkey sequence (3) the KVM Switcher Software. 3.1. Face-panel buttons The face-panel button allows you a direct control over KVM switching operation. Simply press the button to switch to the corresponding PC port (and audio/mic channel, if binding is enabled). By default, PC port switching and audio/mic port switching are bound together.
Manual_Page 6 Each keystroke within a hotkey sequence should be pressed within 2 seconds. Otherwise, the hotkey sequence will not be validated. After perform port switching, you have to wait till the KVM Switch icon shows forth the target port before you can perform next switching again. The KVM Switcher icon could be found on the system tray of your Windows desktop after its installation. All the hotkeys are only functional after your PCs are booting into the OS.
Manual_Page 7 • Start Auto-Scan Right-click the KVM Switcher icon to evoke the operation menu, then select Start Auto-Scan to activate autoscanning. • Stop Auto-Scan (While autoscanning) right-click the KVM Switcher icon to evoke the operation menu, then select Stop Auto-Scan to de-activate autoscanning. Or you can press any button on the facepanel to stop Auto-scan.