Datasheet

Manual_Page 4
www.equip-info.net
After the installation is completed, you will see a KVM Switcher icon on the system tray
of your window desktop. Just right click to evoke the operation menu and double-click to
evoke configuration box. For operation details of the KVM Switcher software, please refer
to the Operation Quick Reference.
The KVM Switcher Software supports only the Windows operating system on PC plat-
forms. For other OS platforms such as Linux , you can still use the keyboard hotkey -
ScrLk + ScrLK - to switch PC. However, this switching hotkey is not available on non-PC
platform such as MacOS. When connected to a Mac machine, use the face-panel button
to switch port.
Step 2
Connect the shared USB keyboard, mouse, monitor, speaker/headphone and microphone
each to its port on your KVM Switch.
Step 3
Connect each KVM PC port to a computer, using the slim 3-in-1 KVM combo cable and the
audio/mic cable. After you have connected the KVM and computers properly, Now you
can operate the KVM Switch immediately.
Some older computers with USB interface might need to manually enable the USB option
in the BIOS settings before you can use any USB devices. If your USB interface does not
work, please check the USB option status in the BIOS.
If you use Windows 95/98/SE and has not yet installed a USB mouse on your computer,
there might be an error message telling you that mouse is not detected and prompting
you to decide whether to ignore the same message in the future, and yet you found there
is no mouse movement to disable this message. So it is suggested that you should instal-
led your USB mouse on your computer first, before connecting it to this KVM Switch.
: No live connection detected
: Current active PC channel is on port 1
: Current active PC channel is on port 2