User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Wi-Fi Extender
- 02 /
- CONNECTING YOUR Fios Home Wi-Fi Extender
- 2.0/ Setting up Your Fios Home Wi-Fi Extender
- 2.1/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING ADVANCED SETTINGS
- 4.0/ Using Advanced Settings
- 4.1/ Management
- 4.2/ Admin Password
- 4.3/ Factory Default
- 4.4/ System Log
- 4.5/ Advanced Log
- 4.6/ DHCP Log
- 4.7/ BHM Log
- 05 /
- TROUBLE
- SHOOTING
- 5.0/ Troubleshooting Tips
- 5.1/ Frequently Asked Questions
- 06 /
- SPECIFICATIONS
- 6.0/ General Specifications
- 6.1/ LED Indicators
- 6.2/ Environmental Parameters
- 7 /
- NOTICES
- 7.0/ Regulatory Compliance Notices
11
/ INTRODUCTION
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
• Ethernet LAN - connects devices to your
Fios Home Wi-Fi Extender using Ethernet cables to join the
local area network (LAN). The two Ethernet LAN ports are
10/100/1000 Mbps auto-sensing and can be used with either
straight-through or crossover Ethernet cables.
• Coax LAN - connects your Fios Home Wi-Fi Extender to the LAN
and/or to other MoCA devices using a coaxial cable.
• Reset Button - allows you to reset your
Fios Home Wi-Fi Extender to the factory default settings. To
perform a soft reboot, press and hold the button for at least
three seconds. To reset your Fios Home Wi-Fi Extender to the
factory default settings, press and hold the button for at least ten
seconds.
• Power - connects your Fios Home Wi-Fi Extender to an electrical
wall outlet using the supplied power adapter.
Warning: The included power adapter is for home use only,
supporting voltages from 105-125 voltage in AC. Do not use in
environments with greater than 125 voltage in AC.
1.3c/ MOUNTING THE FIOS HOME WIFI EXTENDER TO A WALL
For optimum performance, the Fios Home Wi-Fi Extender is
designed to stand in a vertical upright position. Verizon does not
recommend wall mounting the Fios Home Wi-Fi Extender. However,
if you wish to mount your Fios Home Wi-Fi Extender, you can
purchase a wall mount bracket from the Verizon Fios Accessories
Store at verizon.com/home/accessories/networking-wifi