User's Guide

23
 / CONNECTING YOUR
FIOS HOME WIFI EXTENDER
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
If your Fios Home Wi-Fi Extender is subsequently reset to the
factory default settings, the settings printed on the label will again
be in eect.
If your Fios Home Wi-Fi Extender fails to connect, follow the
troubleshooting steps in the Troubleshooting section of this guide.
CONNECTING A WIFI DEVICE USING WPS
Wi-Fi Protected Setup (WPS) is an easier way for many devices
to set up a secure wireless network connection. Instead of
manually entering passwords or multiple keys on each wireless
client, such as a laptop, printer, or external hard drive, your
Fios Home Wi-Fi Extender creates a secure wireless network.
In most cases, this only requires the pressing of two buttons –
one on your Fios Home Wi-Fi Extender and one on the wireless
client. This could be either a built-in button or one on a compatible
wireless adapter/card, or a virtual button in software. Once
completed, this allows wireless clients to join your wireless network.
To initialize the WPS process, you can either press and hold
the unified button located on the front of your Fios Home Wi-Fi
Extender for more than two seconds or use the GUI and press the
on-screen button.