User's Guide
Table Of Contents
- 01 /
- Introduction
- 1.0/ Package Contents
- 1.1/ System Requirements
- 1.2/ Features
- 1.3/ Getting to Know Your Fios Home Wi-Fi Extender
- 02 /
- CONNECTING YOUR Fios Home Wi-Fi Extender
- 2.0/ Setting up Your Fios Home Wi-Fi Extender
- 2.1/ Main Screen
- 03 /
- WIRELESS SETTINGS
- 3.0/ Overview
- 3.1/ Wireless Status
- 3.2/ Basic Settings
- 3.3/ Advanced Settings
- 3.4/ Channel Settings
- 3.5/ Guest Network
- 04 /
- CONFIGURING ADVANCED SETTINGS
- 4.0/ Using Advanced Settings
- 4.1/ Management
- 4.2/ Admin Password
- 4.3/ Factory Default
- 4.4/ System Log
- 4.5/ Advanced Log
- 4.6/ DHCP Log
- 4.7/ BHM Log
- 05 /
- TROUBLE
- SHOOTING
- 5.0/ Troubleshooting Tips
- 5.1/ Frequently Asked Questions
- 06 /
- SPECIFICATIONS
- 6.0/ General Specifications
- 6.1/ LED Indicators
- 6.2/ Environmental Parameters
- 7 /
- NOTICES
- 7.0/ Regulatory Compliance Notices
CONFIGURATION ACCESS TO YOUR
FIOS HOME WI-FI EXTENDER
You can easily add wireless devices to your wireless network using
the WPS option if your wireless device supports the WPS feature.
To access WPS using the user interface:
1. From the main menu, select Wi-Fi settings, then select Wi-Fi
Protected Setup (WPS).
2. Enable the protected setup by moving the selector to On.
3. Use one of the following methods:
• If your wireless client device has a WPS button, press
the unified button on your Fios Home Wi-Fi Extender for
more than two seconds, then click the WPS button on
your wireless device (client) to start the WPS registration
process.
• If your client device has a WPS PIN, locate the PIN
printed on the client’s label or in the client documentation.
Enter the PIN number in the Client WPS PIN field. The