User's Guide

25
 / CONNECTING YOUR
FIOS HOME WIFI EXTENDER
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
Client WPS PIN field is located in the section 2 - PIN
enrollment on the user interface.
• Click Register.
• Alternatively, you can enter the
Fios Home Wi-Fi Extender’s PIN shown on this screen into
the WPS user interface of your device, if this PIN mode is
supported by your wireless device.
4. After pressing the unified button (WPS) on your Fios Home
Wi-Fi Extender, you have two minutes to press the WPS
button on the client device before the WPS session times
out.
When the unified button (WPS) on your Fios Home Wi-Fi
Extender is pressed, the Status LED on the front of your
Fios Home Wi-Fi Extender begins flashing blue. The flashing
continues until WPS pairing to the client device completes
successfully. At this time, the Status LED turns solid blue.
If WPS fails to establish a connection to a wireless
client device within two minutes, the Status LED on your
Fios Home Wi-Fi Extender flashes red for two minutes to
indicate the WPS pairing process was unsuccessful. After
flashing red, the light returns to solid white to indicate that
Wi-Fi is on.